Suggested Uses for Dri-It Moisture Absorber
Dri-It Desiccants control humidity, using the same successful and proven formula used in shipping containers from Fortune 500 Companies worldwide.
Dri-It simply prevents damaging condensation from forming by collecting up to 300% of its weight in moisture. With Dri-It, the dew point temperature is kept below surface temperature, therefore effectively preventing condensation, thus preventing odors, mold, mildew and rust damage to treasured items
 |
Looking for Dri-It? Visit our new online store here. |
Use Dri-It to help keep ANY stored valuables safe from moisture damage. Here are a few suggestions:
|
NO. OF POUCHES |
Storage Areas/Closets (50 – 100 cu.ft.) |
2 |
Storage Areas/Closets (100 – 150 cu.ft.) |
2-6 |
Storage Areas/Closets (150 – 200 cu.ft.) |
6-8 |
Under Sink, Bath or Kitchen (single door) |
1 |
| Under Sink, Bath or Kitchen (double door) | 2 |
Home Living/Bedroom Areas (most) |
6-8 |
|
|
Sports Cars |
2-3 |
Passenger Cars (passenger area) |
4-6 |
Passenger Cars (trunk) |
2 |
Large Vans |
6-8 |
| Truck (Cab area) | 2 |
Truck (Toolbox) |
2 |
| Motorcycles/Snowmobiles/Bicycles | 2 |
| ABSOLUTE must-have for Collectible Autos | 4-6 |
|
|
|
|
18' to 20' |
2-4 |
21' to 25' |
4 |
26' to 28' |
4-6 |
30' to 35' |
6-8 |
36' to 40' |
8-10 |
|
|
|
|
Gun Safe/Cabinets (less than 50 cu. ft.) |
1-2 |
Gun Safe/Cabinets (more than 50 cu. Ft.) |
2-4 |
Portable Gun Box |
1 |
Ammo Box |
1 |
|
|
|
|
Private Aircraft (cockpit) |
4-6 |
Private Aircraft (stowage/cargo compartment) |
2-4 |
|
|
|
|
Golf Bag |
1 |
Tool Box (small to medium) |
1 |
Waders |
1 |
Sports Bag |
1 |
|
Directions for using Dri-It Moisture Absorber.
Step One: Remove Dri-It® pouches and humidity indicator card from foil bag. Recommended amount: One to two pouches for every 50 cubic feet (5’x5’x2’). Pouch life may vary depending on humidity conditions.
For delicate surfaces: Leave the brown film on the back of the Dri-It pouch and place it print-side up to avoid removing paint or wallpaper, or damaging surfaces.
For non-delicate surfaces: Peel brown film off the back of the Dri-It pouch and stick it where needed. Do not place the printed side of the Dri-It pouch in direct contact with metal.
Step Two: For best results, position Dri-It as high as possible, as moisture rises. Let Dri-It do its job.
Step Three: Replace Dri-It pouch when it feels completely like a gel, which means it is saturated. Dispose with regular waste and replace with new Dri-It pouches. Use the Dri-It humidity indicator card to help you determine the relative humidity level. The highest pink dot on the card indicates the current level of humidity. The dots continue to change color as humidity fluctuates.
